SAVE 5% ON OUR CATCH CANS, PORTED THROTTLE BODIES & INSULATORS

TLPP05

Camaro Oil Catch Can Guide: 3.6 V6, SS, ZL1 and 2.0 Turbo

Tracy Lewis Performance |

Choosing a Camaro catch can starts with your engine, not your trim level. The right kit depends on how your engine manages crankcase pressure, whether it uses direct injection or port injection, and how the factory PCV system is routed — all of which vary considerably across the Camaro lineup. A V6 LFX, a V8 LS3, and a 2.0T LTG share a nameplate but have meaningfully different intake paths, and an install that fits one will not transfer cleanly to another.

This guide maps the four main Camaro engine families — the 3.6L V6 (LLT, LFX, and LGX), the 6.2L V8 (LS3, LT1, and LT4), and the 2.0L LTG turbo — to the specific Tracy Lewis catch can kit or LT4 PCV Diverter that matches each configuration. If you already understand how an oil catch can works, skip straight to the engine-to-kit table below to find your fit, then read the engine-specific section for install context. If you want to browse everything at once, the full Camaro catch can collection is a good starting point.

Camaro Catch Can Quick Selector: Match Your Engine to the Right Kit

Use the Camaro oil catch can comparison table below as your first step. Find your engine, confirm your injection type, and follow the link to the correct kit. Detailed engine-by-engine breakdowns follow the table.

Engine-to-Kit Comparison Table

Camaro Engine Family Injection Type Key Consideration Recommended Tracy Lewis Solution
3.6L LLT (2010–2011) / LFX (2012–2015) / LGX (2016–2024) Direct injection Intake-path oil vapor; DI maintenance considerations for the Camaro V6 catch can 6 Cylinder Camaro Catch Can
6.2L LS3 (2010–2015 SS) Port injection Different intake-valve context than DI engines; PCV management and usage goals still apply 5th & 6th Gen V8 Camaro Catch Can
6.2L LT1 (2016–2024 SS) Direct injection DI intake and PCV concerns; the LT1 catch can question comes up frequently in owner forums 5th & 6th Gen V8 Camaro Catch Can
6.2L LT4 (2017–2024 ZL1, supercharged) Direct injection, supercharged Supercharger-inlet and PCV-routing considerations; evaluate the diverter alongside the V8 kit V8 Catch Can + LT4 PCV Diverter
2.0L LTG Turbo (2016–2023) Direct injection, turbocharged Turbo and intercooler intake-path considerations for the 2.0 turbo Camaro catch can 4 Cylinder Camaro Catch Can

Years shown are the fitment ranges listed on each Tracy Lewis product page (the V8 kit is listed for the 2010–2024 V8 Camaro as a whole). Check the product page before ordering; engine codes do not always align neatly with model year across generations. Every kit is built to order for your specific vehicle and made in the USA, so allow a short lead time.

Camaro 3.6 V6 Catch Can Guide: LLT, LFX, and LGX

Which Camaro V6 Engines Use Direct Injection?

The three 3.6L V6 engines found in Camaro models — the LLT, LFX, and LGX — all use direct injection, meaning fuel is sprayed directly into the combustion chamber rather than upstream into the intake port. That distinction is important when evaluating a Camaro V6 catch can because the intake valves in a direct-injected engine do not receive the fuel-washing effect that port-injected designs benefit from. The PCV system continues to route crankcase vapors through the intake path regardless of injection type, and on a DI engine, everything that travels that path deposits where it lands.

The LLT powered the 2010–2011 5th-generation Camaro (304 hp in 2010, 312 hp in 2011, factory figures), the LFX replaced it for 2012–2015 (323 hp), and the LGX carried the 3.6L family into the 6th-generation car from 2016 on (335 hp). All three share the direct-injection architecture that makes this category worth discussing; the differences between them are covered in LLT vs. LFX vs. LGX: GM 3.6 V6 generations. The 6 Cylinder Camaro Catch Can product page lists the 2010–2011 LLT, 2012–2015 LFX, and 2016–2024 LGX Camaro.

What to Know About V6 PCV Routing and Oil Vapor

The factory PCV system on these engines routes crankcase blow-by gases back into the intake to be burned rather than vented to atmosphere. That is the correct function of a PCV system, and it is not something the catch can replaces or defeats. What a catch can does is intercept that vapor before it reaches the intake tract, separate the oil aerosol from the gases, collect it in a reservoir, and allow cleaner air to continue through.

Owners commonly report finding a visible oil film inside intake plumbing and on throttle-body components when inspecting their LLT, LFX, and LGX Camaros — particularly on higher-mileage examples or vehicles used for spirited driving. Forum discussions often mention this as an early prompt to investigate PCV management. The Tracy Lewis design is a patented air/oil separating crankcase evacuation system that maintains full-time vacuum on the crankcase rather than passively trapping what passes through, and the kit includes the Clean Side Separator, which addresses oil ingestion upstream of the throttle body — a path an ordinary catch can does not reach.

Recommended Kit for LLT, LFX, and LGX Camaro Models

The 6 Cylinder Camaro Tracy Lewis Catch Can is the direct-fit kit for LFX catch can and LGX catch can applications, as well as the earlier LLT. Fitment-year specifics are confirmed on the product page; verify your engine code and model year there before ordering.

Installation questions usually come down to correctly identifying the PCV hose connections for your generation, particularly on 6th-gen models where bay clearance is tighter than on earlier Camaros. The catch can installation instructions page collects the published install guides by vehicle; review the one for your engine before you start pulling hoses.

Confirm fitment and view the full V6 kit details at the product page linked above. For broader engine-specific installation guidance on Chevrolet platforms, the Chevrolet installation hub covers engine families across the GM lineup.

You can also review all Camaro V6 catch can options in the Camaro collection if you want to compare before deciding.

Camaro SS and ZL1 Catch Can Guide: LS3, LT1, and LT4

LS3 vs. LT1 vs. LT4: Why Injection Type Changes the Conversation

The Camaro SS has used at least two meaningfully different V8 configurations depending on generation, and the Camaro ZL1 adds a third. Treating all of them the same misses important engine differences that affect how you should think about a Camaro SS catch can.

The LS3 is a port-injected V8. Fuel enters upstream of the intake valve, which means the valve face receives a continuous wash of fuel mist during normal operation. This is an important distinction: the intake-valve carbon accumulation rationale that applies to direct-injected engines does not apply to the LS3 in the same way, and it would be inaccurate to present LS3 owners with the same framing. The LT1 is a direct-injected V8 and a fundamentally different engine despite sharing a displacement and a model designation with its predecessor. The LT4 is a supercharged version of the LT1 architecture, adding forced induction and its own PCV routing considerations on top of the DI foundation.

Understanding which engine you have — not just which trim you have — is the first step in evaluating a catch can for your car.

Camaro SS Catch Can Considerations for LS3 and LT1 Owners

LS3: Because the LS3 is port-injected, the valve-coking argument that drives many DI catch can conversations does not apply here. That said, LS3 owners — particularly those who track their cars — do engage in active discussions about intake oil management, PCV behavior at sustained high RPM, and general crankcase ventilation hygiene. Forum discussions often mention catch can installs on LS3 Camaros as a track-preparation measure rather than a DI-specific necessity. Whether that's the right call for your LS3 depends on how you use the car.

LT1: The 6th-generation Camaro SS uses the LT1, a direct-injected V8 that brings DI-related intake-path considerations back into the conversation. Owner forums and communities discuss oil consumption on LT1-equipped vehicles with some regularity — those discussions are community observations, not a diagnosis, and a catch can should be understood as part of a PCV management approach rather than a guaranteed remedy for any specific condition. The direct-injection architecture does mean the intake-path rationale for a catch can is more similar to the V6 discussion above than to the LS3.

The 5th & 6th Gen V8 Camaro Tracy Lewis Catch Can covers the 2010–2024 V8 Camaro — LS3, LT1, and LT4 — and is built to order for your specific car, so confirm your engine and model year when ordering.

LT4 ZL1 Catch Can and PCV Diverter Considerations

The LT4, found in the Camaro ZL1, is a supercharged, direct-injected 6.2L V8. That combination introduces PCV routing considerations that go beyond the naturally aspirated LT1. The supercharger inlet sits in the airpath in a way that changes how crankcase vapor can interact with induction components, and owner discussions around the Camaro ZL1 catch can topic often include reports of oil appearing around or related to the supercharger inlet.

This is why the LT4 should be treated as its own routing scenario rather than a straightforward V8 kit install. Tracy Lewis offers the PCV Diverter for the GM LT4 as a dedicated product to address the specific routing concern on this engine. For ZL1 owners, the evaluation should include both the V8 catch can and the PCV Diverter — the product pages for each will explain the intended function and how they work together for this application.

Because the LT4 is supercharged, the product-page check-valve rule applies: if the engine is generating more than 12 pounds of boost, the high-performance billet aluminum check valve goes on the intake-manifold side, while the other side keeps the standard valve. Refer to the 5th & 6th Gen V8 Camaro Catch Can for the primary kit recommendation, and compare Camaro V8 and other engine options in the full collection.

2.0 Turbo Camaro Catch Can Guide: LTG Engine Considerations

Why the LTG Turbo PCV System Needs Its Own Catch Can Approach

The 2.0 turbo Camaro catch can conversation starts in a different place than the V6 and V8 discussions because the LTG's turbocharged direct-injection architecture changes the intake path in ways that naturally aspirated engines don't share. The turbocharger and charge-cooling system add components that crankcase vapors can interact with before reaching the combustion chamber, and the LTG's status as both turbocharged and direct-injected makes it a distinct case worth addressing on its own terms.

Owners of LTG-equipped Camaros commonly report finding oil residue in intercooler-related plumbing when inspecting their intake systems. This is a recurring observation in community discussions rather than a universal diagnostic finding — actual accumulation varies by driving conditions, mileage, and engine health. That said, the observation is consistent enough across forums to be relevant context for owners evaluating PCV management options on this engine.

For a deeper look at how the LTG's turbocharged setup affects the catch can conversation, the dedicated LTG 2.0 Turbo resource page goes further than this guide is able to in a Camaro-specific summary.

Recommended Catch Can for Camaro LTG Models

The 4 Cylinder Camaro Tracy Lewis Catch Can is the LTG catch can option designed specifically for this application. The product page lists the 2016–2023 Camaro 2.0 LTG — verify your model year there before ordering. As with the other kits, more than 12 pounds of boost calls for the high-performance check valve on the intake-manifold side.

Camaro catch can install questions on the LTG usually center on hose routing around the turbo-related plumbing and confirming the connection points specific to the 2.0T layout. Follow the installation guide supplied with the kit for this engine.

For installation guidance on Chevrolet platforms more broadly, the Chevrolet installation hub is the right resource alongside the LTG-specific product page. The dedicated LTG page is also worth bookmarking if you want engine-specific technical context beyond what a Camaro-focused guide can cover.

Camaro Catch Can Install Notes: What to Check Before You Order

Confirm Your Engine Before Ordering

The most common ordering mistake in this category is shopping by generation or trim instead of by engine code. A 5th-gen Camaro catch can need and a 6th-gen Camaro catch can need may call for the same kit or an entirely different one depending on what's under the hood. “SS,” “ZL1,” “V6,” and “turbo” are useful shorthand for conversations but they are not substitutes for confirming your engine family before purchase.

Before ordering, locate your engine code — it appears on the engine itself, on your build sheet, or through your VIN decoder — and cross-reference it against the product page fitment information. If your year falls in a transition period between generations or trim updates, the product page is the authoritative source on what the kit covers.

Common Camaro Installation Questions

Installation questions frequently involve a handful of recurring topics across all engine families:

Mounting location: Which side the catch can mounts on depends on the engine and the specific kit. This is not consistent across the Camaro lineup, and forum threads that give a confident answer for one engine may not apply to yours. The product page for your engine family specifies the mounting side.

Engine-bay clearance: The 6th-gen Camaro engine bay is more compact than earlier generations, and owners frequently note that hose routing and can placement require closer attention to nearby components. The installation guide for your specific kit is the most reliable reference here.

Dipstick access: Some installations interact with dipstick routing or access, depending on mounting position. This is mentioned in owner discussions frequently enough to be worth checking against your engine-specific installation guide before you get started.

Hose routing and connection points: Each engine family has its own PCV connection arrangement, and matching hose diameters, routing paths, and connection orientation correctly is the step most likely to cause delays. If you want to visualize how catch can routing works in principle before starting your install, what is an oil catch can and how does it work explains the separation path, and do you need an oil catch can? covers the decision itself before you're elbow-deep in the engine bay.

For Chevrolet-specific installation resources by engine family, the Chevrolet installation hub is the primary reference point. If you're still selecting a kit, browse all Camaro catch can options to confirm your engine before committing.

Catch Can Maintenance, Warranty, and Legal Questions

Emptying and Inspecting a Camaro Catch Can

How often you empty your catch can will depend on your engine, how you drive, and what conditions the car operates in. There is no universal interval that applies cleanly across a V6 daily driver, a tracked LT1 SS, and a supercharged ZL1 — the collection rate differs meaningfully between those use cases. Follow the specific guidance in your Tracy Lewis kit instructions for inspection and emptying, and use the first several drain cycles after installation to establish a baseline for your vehicle and usage pattern. Inspect the connections and fittings as part of each service to confirm the install remains seated correctly.

Does a Camaro Catch Can Void the Warranty?

This is one of the most searched questions in the owner community, and it is a reasonable one to ask before modifying a vehicle under warranty coverage. The short answer is that adding an aftermarket component to your PCV system can be a point of contention during warranty claims, and outcomes can depend on the dealership, the specific claim, and how the installation was performed. The broader oil catch can guide covers the warranty and legal framework in more detail.

Retaining your factory parts and following the product installation instructions are generally cited as best practices when adding any aftermarket component to a vehicle still carrying a manufacturer warranty.

Is a Catch Can Legal for Street Use?

Emissions and modification legality vary by state and jurisdiction, and this guide is not the right place for a definitive answer that applies universally. The oil catch can guide pillar addresses the broader legal and emissions framework. Check your local regulations and confirm the product configuration you're considering before installing on a vehicle that must pass emissions inspections.

Choose the Right Tracy Lewis Camaro Catch Can

Every Camaro catch can decision comes back to the same starting point: identify your engine first, then choose the kit built for it.

  • LLT / LFX / LGX 3.6L V6 — the V6 kit is the direct route for all three direct-injected 3.6L Camaro engines
  • LS3 / LT1 6.2L V8 — the V8 kit covers both, with the important caveat that the port-injected LS3 and direct-injected LT1 carry different intake-path considerations
  • LT4 ZL1 supercharged V8 — the V8 kit plus a PCV Diverter evaluation is the right combination for the supercharged application
  • LTG 2.0L turbo — the four-cylinder LTG catch can kit is purpose-built for this engine's distinct PCV and intercooler routing context

Shopping by generation or trim gets you close, but only engine confirmation gets you to the right kit. Use the table above, verify the fitment years on the product page, and order accordingly.

Related Products

6 Cylinder Camaro Tracy Lewis Catch Can
For LLT, LFX, and LGX 3.6L V6 Camaro models.

5th & 6th Gen V8 Camaro Tracy Lewis Catch Can
For LS3, LT1, and LT4 V8 Camaro models.

4 Cylinder Camaro Tracy Lewis Catch Can
For LTG 2.0L turbocharged Camaro models.

PCV Diverter — GM LT4
The companion product for LT4-equipped ZL1 models evaluating supercharger-inlet PCV routing.

Browse all Camaro catch can options

Camaro Catch Can FAQs

Does a Camaro V6 need a catch can?

The LLT, LFX, and LGX are all direct-injected engines, which means crankcase vapors traveling through the PCV system reach the intake path without the fuel-washing effect that port-injected designs provide. Owners and communities that discuss these engines frequently cite visible oil accumulation in intake plumbing as a reason for considering PCV management. Whether a catch can is necessary for your specific use case depends on your driving habits, mileage, and goals — but the direct-injection design is the relevant engine characteristic that makes the discussion applicable to these V6 Camaro models.

Does a Camaro SS need a catch can?

That depends on which SS you have. The 5th-generation Camaro SS used the LS3, a port-injected V8. The 6th-generation SS uses the LT1, a direct-injected V8. These are meaningfully different engines, and the rationale for a catch can on each is different. For the LT1, the DI architecture makes the PCV discussion applicable in a similar way to other direct-injected GM engines. For the LS3, the port-injection design changes the conversation — the intake-valve carbon-buildup rationale that applies to DI engines does not apply here in the same way, though some LS3 owners install catch cans for track-use PCV management. Confirm your engine code before deciding.

Does an LS3 Camaro need a catch can?

The LS3 is a port-injected engine, which means it does not share the same intake-valve considerations as the direct-injected LT1, LT4, or V6 engines in the Camaro lineup. The rationale for a catch can on a DI engine — specifically around what accumulates on intake valves over time — does not apply to the LS3 in the same way. Some LS3 owners choose to install a catch can for crankcase ventilation management, particularly for track use, and that is a reasonable decision based on usage rather than an engine-architecture necessity. If you have an LS3 and are considering a kit, the 5th & 6th Gen V8 Catch Can covers this application.

Which side does a Camaro catch can mount on?

Mounting location is specific to the engine family and the kit design — there is no single answer that applies across LLT, LFX, LGX, LS3, LT1, LT4, and LTG engines. The product page for your specific kit will confirm the mounting side and include installation references. Each kit ships with an engine-specific installation guide; that is the most reliable guide to position, orientation, and hose routing for your particular Camaro. If you have additional questions before purchasing, the Chevrolet installation hub is a good first resource.

How often should I empty my Camaro catch can?

Collection rates vary based on engine, mileage, driving conditions, and how hard the car is used. There is no universal emptying interval that holds across every Camaro owner's situation. Follow the guidance in your Tracy Lewis kit documentation, inspect the can and connections regularly, and use your early drain cycles to establish a baseline for your vehicle. If you are tracking the car or driving it hard consistently, inspect more frequently until you have a clear sense of your collection rate.