GM 80MM Ported Throttle Body
We’re proud to offer more ways to pay. Get what you want in 4 interest-free payments or choose a monthly payment plan when you check out with Shop Pay.
GM 80MM Ported Throttle Body - LGX 80MM is backordered and will ship as soon as it is back in stock.
This Throttle Body will require tuning!
Increased throttle response, gains in low end torque, and overall increases of 4-12 RWHP depending upon the application.
The LGX 80MM and LFX 80MM Ported Throttle Bodies are $399, No core charge
Installation Tips
Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
Learn more
- What is a ported throttle body, and what does it do?
- What is a ported intake manifold, and how much HP does it add?
FAQ
Does the 80mm ported throttle body require tuning?
Yes. This throttle body will require tuning.
What gains can I expect?
Increased throttle response, gains in low end torque, and overall increases of 4-12 RWHP depending upon the application.
Which engines is the 80mm available for, and what does it cost?
The LGX 80mm and LFX 80mm ported throttle bodies are $399, with no core charge.
Do I need to do anything after installing it?
Yes. Perform the OEM recommended idle relearn procedure. Some applications require an OBD scan tool, others refer to the owner's manual. A relearn can also be forced by disconnecting the negative battery cable for several minutes to clear the control module's memory.
What if the idle is erratic after installation?
Erratic idle or engine surging may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM, then perform the relearn again if a drivability condition is present.
Is there anything to check during installation?
Clean the intake manifold mounting surface and replace the intake manifold gasket if necessary. Inspect the air cleaner intake hose for cracks and proper sealing. Check the harness for broken wires. Clear all diagnostic trouble codes before the idle relearn.
GM 80MM Ported Throttle Body
