5TH Gen Camaro Tune - With HP Tuners

5th Gen Camaro Tune – With HP Tuners

Stop leaving power and drivability on the table — this complete HP Tuners package gives your 5th Gen Camaro a real, iterative custom tune built around your actual car, your actual mods, and your real-world datalogs.

What's Included

• MPVI4 Interface + 2 Credits — Everything you need to get started. No separate hardware purchase required.
• Multiple Octane Tune Files — Calibrations for 87, 91, and 93/94 octane so you can run what's available at the pump.
• 2–3 Revision Cycle — This isn't a one-and-done flash. You'll pull a stock read, send a drive log, receive a revised tune, log it again, and repeat until your individual car is properly dialed in.
• Transmission Recalibration — Fully rewritten shift points that downshift with less throttle input, upshift at better moments, reduce low-speed bogging, and make the car feel noticeably lighter and easier to drive around town.
• Raised Rev Limiter — Let the LFX breathe the way it was meant to.
• Earlier Cooling Fan Activation — Better thermal management under spirited driving.
• Smoother, Stronger Power Delivery — Less peaky, stronger mid-range torque, more responsive and consistent throttle feel.

Mod Support Built Right In

This tune is written to accommodate the most common 5th Gen upgrades:

• Aftermarket air intakes and throttle bodies
• Exhaust work including downpipes, plus P0420/P0430 code suppression
• E85 flex fuel conversions, where applicable
• Differential gear changes such as 3.91 gears
• Forced induction — Overkill supercharger systems are supported

How It Works

1. Download VCM Suite from hptuners.com/downloads.
2. Read your stock tune using the MPVI4 — do not read the FPCM. Leave that box checked as “Do Not Read” or it will consume 2 additional credits.
3. Load the included LFX scan config file, complete a 5–10 minute drive log, and email both files labeled with your name.
4. Receive your revised tune, flash it, log again, and repeat — typically 2–3 rounds to fully dial in your specific car.

Already own an HP Tuners interface with credits? Head back to the listing and select the email tune only option.

If you're serious about getting the most out of your 5th Gen Camaro Tune with HP Tuners, this is the process that actually works — not a generic off-the-shelf file, but a calibration built around your car, your fuel, and your modifications.

FAQ

What is included with the 5th Gen Camaro Tune with HP Tuners?

The package includes an MPVI4 interface with 2 credits, multiple octane tune files, a 2–3 revision cycle, transmission recalibration, raised rev limiter, earlier cooling fan activation, and smoother, stronger power delivery.

Which octane tune files are included?

Calibrations are included for 87, 91, and 93/94 octane so you can run what is available at the pump.

How does the tuning process work?

Download VCM Suite, read your stock tune with the MPVI4, send a 5–10 minute drive log with the required files, receive a revised tune, flash it, log again, and repeat for typically 2–3 rounds.

What modifications can this tune support?

The tune can accommodate common 5th Gen upgrades including aftermarket air intakes and throttle bodies, exhaust work including downpipes, P0420/P0430 code suppression, E85 flex fuel conversions where applicable, 3.91 differential gears, and Overkill supercharger systems.

What should I avoid when reading the stock tune?

Do not read the FPCM. Leave that box checked as “Do Not Read” or it will consume 2 additional credits.

What if I already own an HP Tuners interface with credits?

If you already own an HP Tuners interface with credits, head back to the listing and select the email tune only option.